We use cookie files and similar technologies to ensure that users are as comfortable as possible

Shearer CLS550P

<p>Provides efficiency of up to 10 tons per minute.</p>
0,8 – 1,0
Cutting drum diameter, m
Efficiency, t / min
Rated mains voltage, V
0,85 – 1,5
Seam thickness, m

Designed for operation in thin and medium coal seams with changing hypsometry of 0.85-1.5 m.

Provides efficiency of up to 10 tons per minute.

Portal-frame shearer with box-shaped high-load frame to place feeding blocks and frequency converter.

The portal is designed in a way of separate bearing elements, rigidly connected with feeding frame and remote control assembling places.

Shearer length, including installed frequency converter, is 7.78 meters along the axes of cutting drums.

This positively affects on decreasing the coal-cutting with stone, which allows the customer to mine more “pure coal” with minimum rock content.

There used an imbedded contactless commutator between the rectifier and inverter, which excludes the DC links over-current and highly increases converter sustainability.

CLS550P is equipped with modern visualization software, which allows to control shearer operation in real-time mode, automatically calculate daily output, as well as analyse in details recorded data and figure out causes of efficiency decrease and equipment downtime.

CLS550P is fitted with modern control system that monitors main units load and automatically regulates shearer feeding speed. System controls main operational functions and allows to minimize shearer downtime (providing control automatization, mining recording, connection between shearer and other longwall equipment, transferring data to gateway and/or to the surface).

Efficiency, t / min 10
Seam thickness, m 0,85 – 1,5
Rated mains voltage, V 1140
Cutting drum diameter, m 0,8 – 1,0
Rated width of cut, m 0,8
Maximum feeding speed, m/min 12
Maximum feeding traction force, kN 480
Length between the axes of cutting drums, mm 7781
Frame height in the area of roof support, mm 440
Total rated electric drives capacity, kW/h 508
Cutting drum drive 2 х 220
Pump drive 8
Feed drive 2 х 30
Hydraulic block drive 8
Weight, t 28

Send us a questionnaire


In addition to this product, following services can be ordered:

# Armored conveyors with twin outboard chains arrangement SPTs271M # Armored conveyors with twin outboard chains arrangement SPTs230 # Armored conveyors with twin outboard chains arrangement SP326 # Armored conveyors with twin outboard chains arrangement SP251 # Powered roof supports KD90 # Powered roof supports KD90T # Powered roof supports DT